Wall Additions & Removal Services in Greater Cincinnati
Schedule Your Consultation
New Leaf Home Repair and Remodeling has been providing wall removal and addition services to Cincinnati-area homeowners since 2020. Whether you are removing a load-bearing wall to open up your floor plan, adding a new partition wall, or converting to a fully open layout, our crew handles the full scope including structural assessment, beam installation, electrical coordination, and all finish work. All projects are backed by our six-month quality assurance warranty.
Load-Bearing Wall Removal
Removing a load-bearing wall is one of the most impactful changes you can make to a home, but it requires proper structural support to do safely. New Leaf handles the full scope, from structural assessment and beam sizing to demolition, beam installation, and patch work.
Signs You May Need This Service
- You want to open up a kitchen, dining room, or living area but a wall is in the way
- A contractor or inspector has identified a wall as load-bearing
- You are planning a full first-floor remodel or open floor plan conversion
- Existing support beams are undersized or showing deflection
- Previous wall removal was done without proper structural support
How do I know if a wall is load-bearing?
Load-bearing walls typically run perpendicular to floor joists, are located above a beam or foundation wall in the basement, or sit in the center of a house. We confirm load-bearing status through a structural assessment before any work begins.
Do you provide the structural beam as part of the project?
Yes. Beam sizing and procurement are included in the project scope. We work with structural specifications to select the correct beam size for the span and load, and we handle installation as part of the project.
Does wall removal include patching the ceiling, floor, and adjacent walls?
Patch work is included in the standard scope. After beam installation, we patch and blend the ceiling drywall, address the floor transition, and finish the exposed wall ends so the space looks clean when we leave.
Non-Load-Bearing Wall Removal
Non-load-bearing walls can be removed without structural beam work, making them a more straightforward way to open up space. New Leaf handles demolition, electrical and HVAC rerouting when present, and full patch work on ceiling, floor, and adjacent walls.
Signs You May Need This Service
- A wall separates two rooms you want combined without involving floor joists above
- You want to remove a partition wall in a basement or interior space
- A wall interferes with a planned layout change in a kitchen or living area
- The wall contains electrical outlets or switches that need to be rerouted
- You have confirmed the wall is not load-bearing and want it removed cleanly
How long does non-load-bearing wall removal take?
Most non-load-bearing wall removals are completed in one to two days. Jobs with electrical rerouting, HVAC ducts, or extensive patch work may take an additional day or two.
What happens to the electrical in the wall?
We coordinate electrical rerouting as part of the project. If the wall contains outlets, switches, or runs that need to be moved or eliminated, we handle that within the scope or bring in a licensed electrician depending on the complexity.
Will I need a permit for non-load-bearing wall removal?
Permit requirements vary by jurisdiction in the Cincinnati area. Projects that include electrical work are more likely to require one. We advise on permit requirements during the consultation and handle the permit process when needed.
Wall Additions and New Wall Construction
Adding a wall lets you divide open space into dedicated rooms, create a home office or bedroom, or add privacy to a floor plan that no longer fits how you live. New Leaf frames, drywalls, tapes, and finishes new walls to match your existing interior.
Signs You May Need This Service
- You want to convert an open loft or basement into a usable room
- A large bedroom or living area needs to be divided for privacy or function
- A past renovation removed a wall that now needs to be rebuilt
- You are adding a home office, guest room, or flex space
- You want to enclose a utility area or mechanical space for a cleaner look
Can a new wall include a door opening?
Yes. Door openings are a standard part of new wall construction. We frame the opening to the door size you choose and include the door installation in the scope if desired.
How do you match the existing drywall texture when adding a wall?
We finish and texture new walls to match the existing room as closely as possible. For common textures like orange peel or smooth finish, the match is typically seamless after paint.
Can you add a wall in a basement with concrete floors?
Yes. We frame basement walls using pressure-treated bottom plates where they contact concrete and attach to the floor using appropriate anchors. We also address moisture considerations during the planning phase.
Open Floor Plan Conversions
Converting a traditional segmented layout to an open floor plan typically involves removing one or more load-bearing walls and replacing them with a structural beam. New Leaf manages the full process, including structural assessment, beam installation, electrical and HVAC coordination, and all finish work.
Signs You May Need This Service
- Your kitchen, dining room, and living area feel disconnected and cramped
- You want a single open entertaining space across the main floor
- Multiple walls between key rooms are ready to come down
- A remodel or home sale is driving the need for a more modern layout
- The home has a traditional chopped-up floor plan common in pre-1990 construction
How many walls does an open floor plan conversion typically involve?
Most conversions involve one to three walls. Each wall is assessed individually for structural status, and the project scope is built around what is needed to achieve the layout you want.
Does New Leaf handle the structural engineer coordination?
Yes. When structural engineering documentation is required for permits or beam sizing, we coordinate with a licensed structural engineer as part of the project. You do not need to source that separately.
What does the space look like while work is underway?
Wall removal and beam installation create significant dust and debris. We use plastic sheeting to contain the work area and clean up each day. Most open floor plan conversions are completed within one to two weeks.
Structural Engineer Coordination
Projects involving load-bearing walls or large beam spans may require stamped structural drawings for permit approval. New Leaf works with licensed structural engineers when the project scope requires it, keeping the process straightforward for you.
Signs You May Need This Service
- Your municipality requires stamped drawings for wall removal permits
- The beam span is large enough to require engineering calculations
- You are removing multiple load-bearing walls in sequence
- The project involves changes near a foundation wall or carrying beam
- A prior contractor completed wall removal without proper documentation
Will I need to hire a structural engineer separately?
No. When structural engineering is needed for a project we are managing, we coordinate that as part of our process. The engineering cost is factored into the project estimate.
How long does structural engineering documentation take?
Turnaround depends on the engineer's schedule and the complexity of the project, but typically one to two weeks. We factor this into the project timeline so it does not delay the start of work unnecessarily.
What happens if a wall turns out to be more complex than expected once demolition starts?
We stop, reassess, and communicate before proceeding. If the structural scope changes based on what we find inside the wall, we update the estimate and get your approval before continuing.
How Our Process Works
Every New Leaf project follows the same four steps:
- Initial Consultation. We come to your home, look at what you have, and listen to what you want. We assess the project scope and walk through the work with you in person.
- Detailed Scope and Estimate. You get a written scope and a detailed estimate before any work starts. If there are areas where costs could shift once we get into the project, we flag them upfront so there are no surprises later.
- Build. Our own crew does the work. We manage the project from start to finish and handle the permit process.
- Punch List and Six-Month Warranty. We do not leave until you have signed off. If a defect appears within six months, we fix it at no charge.
Want the full step-by-step? See our complete process →
Load-bearing walls support the weight of the floors, roof, or other structural elements above them. Common signs include walls that run perpendicular to floor joists, walls located near the center of the house, or walls that sit directly above a beam in the basement. The safest approach is to have a professional assess the wall before any removal work begins. New Leaf coordinates with a structural engineer when needed to confirm load-bearing status and design any required beam replacements.
Non-load-bearing wall removal typically starts around $3,000 and includes demolition, patching the ceiling and floor, and finishing the affected surfaces. Load-bearing wall removal starts around $6,000 and goes up depending on the span of the new beam, structural engineer fees, and how complex the finish work is. Every project is different, so we recommend reaching out for a consultation to get an accurate estimate for your specific situation.
In most Ohio jurisdictions, removing a load-bearing wall requires a building permit because it involves structural changes. Non-load-bearing wall removal may or may not require a permit depending on your local municipality. New Leaf handles the permitting process on your behalf so you do not have to navigate the paperwork yourself. We will let you know upfront what is required for your specific project.
A straightforward non-load-bearing wall removal can often be completed in one to two days. Load-bearing wall removal takes longer because it involves installing a structural beam, which may require additional framing, drywall patching, and finishing work. Most projects are completed within three to five days depending on scope. We will give you a realistic timeline before work begins so you can plan accordingly.
Matching existing materials is one of the trickier parts of wall removal, and it is something we address upfront. For hardwood or LVP floors, we patch or blend the flooring where the wall once stood. Ceilings are re-drywalled and textured to match. Depending on the age and style of your existing finishes, a perfect match may require some creative blending or a full refinish of the affected area. We will be honest about what is achievable before work starts.
Many walls contain electrical wiring, HVAC ducts, or plumbing. Before any demolition begins, we identify what is inside the wall and plan accordingly. Electrical circuits and outlets are safely relocated by a licensed electrician. HVAC runs are rerouted if needed. Plumbing in load-bearing or exterior walls adds complexity and cost. We scope out all of this during the initial consultation so there are no surprises mid-project.
Adding a wall involves framing a new partition wall using lumber or metal studs, securing it to the floor, ceiling, and adjacent walls, running any needed electrical through it, and finishing both sides with drywall, tape, mud, and paint. If the new wall will include a door opening, we frame that in as well. New Leaf handles the full scope so the wall looks like it was always there when we are done.
The best first step is to reach out and tell us about your project. We will schedule an initial consultation to assess the wall in question, discuss what you are hoping to achieve, and put together a detailed scope and estimate. There is no commitment required at that stage. You can contact us through the form on this page or give us a call. We serve Greater Cincinnati including Hamilton County, Warren County, and the surrounding area.
Check Out Some of Our Past Wall Removal Jobs Here:
Why Choose Us?
New Leaf is committed to delivering high-quality remodeling and repair services at honest, affordable pricing. We back all of our work with a six-month worry-free guarantee.
Quality Assurance
All of our work comes with a six-month warranty. If a defect arises from our work, we will repair it at no cost to you.
Fully Insured
We carry liability insurance and workers’ compensation for your peace of mind
Family Based
Family is important to us, and we respect your property as if it were our own.
Our Customers Are Always Right!
New Leaf did an amazing job on 3 repairs/projects on the interior and exterior of my home! Noah & Jonah were great to work with! They were both communicative & friendly and kept me in the loop every step of the way! I would use New Leaf again and would highly recommend their services to family and friends!
Karl and Jonah from New Leaf were honestly some of the best repairmen that I have encountered in their industry in a very long time. Not only did they do a beautiful job fixing our door frame but they were especially friendly and approachable when we had questions. I thought that we were going to struggle with “red tape” or “added costs” like many other companies I’ve dealt with in the past but not only did they not have surprise extra costs but they fixed items not even listed in the contract at no extra costs. What a great pair! Thanks so much fellas!
New Leaf helped us turn our 1970’s ranch into a modern custom living space that meets our day-to-day needs and allows us to entertain large groups of people. They also helped us transform our master bath into a space that feels like a spa. Noah and Wyatt are skilled craftsmen with a great crew. Their attention to detail, excellent communication, honesty, and dependability were amazing. Our friends and family have been blown away by the custom details, and we absolutely LOVE our “new” home