ELECTRICAL REPAIR SERVICES IN CINCINNATI, OH

Not always. A dead outlet is sometimes caused by a tripped GFCI upstream on the same circuit, a tripped breaker, or a loose wire connection. However, outlets that are warm, discolored, or accompanied by a burning smell should be inspected by a licensed electrician promptly.

Yes, but it depends on whether a ground wire is present. If grounding is available, direct replacement is straightforward. If not, a GFCI outlet can be installed in its place as a code-compliant alternative that provides shock protection.

We can replace as many as needed in a single visit. If you have multiple outdated or failing outlets throughout your home, batching the work in one appointment is more efficient and can reduce overall cost.

Repeated tripping is typically caused by an overloaded circuit, a short circuit, or a ground fault. It can also indicate a faulty breaker that no longer holds its rated amperage. A licensed electrician can test the circuit and breaker to determine the correct fix.

If the panel is a recalled brand such as Federal Pacific or Zinsco, is a fuse box, is at full capacity, or consistently cannot handle the home's load, an upgrade is the appropriate solution. Panel repairs make sense when the panel itself is sound and only one or two breakers have failed.

Yes. Panel upgrades require an electrical permit and inspection in Ohio. New Leaf Home Repair and Remodeling handles the permitting process and ensures all work is inspected and approved before the job is closed.

In most cases, yes. As long as an existing junction box is present and rated for the new fixture's weight and type, a direct swap is straightforward. Heavier fixtures such as chandeliers or fans may require a braced or fan-rated box before installation.

Adding a new fixture requires running a circuit from the panel or a nearby junction box, installing a ceiling or wall box, and connecting the fixture. The complexity depends on how far the new location is from existing wiring and whether attic or wall access is available.

Yes. Recessed light installation is a common request in Cincinnati homes, especially during kitchen and living room updates. We assess ceiling access and existing wiring before providing an estimate for the work.

Yes, but the existing junction box must be fan-rated to support the added weight and movement. If the existing box is not rated for a fan, we install a braced fan box before mounting the new unit.

Wobbling is usually caused by unbalanced or misaligned blades, a loose blade bracket, or an improperly secured mounting. In most cases, wobbling can be corrected without replacing the fan. We inspect and balance the unit before recommending replacement.

Yes. We can install a dedicated wall switch for a ceiling fan, or add a compatible receiver inside the fan canopy to enable remote or smart control. The right solution depends on the fan model and available wiring.

GFCI (Ground Fault Circuit Interrupter) protection prevents electrical shock by detecting current leaking to ground and cutting power within milliseconds. AFCI (Arc Fault Circuit Interrupter) protection detects arcing faults in wiring that can cause electrical fires. Ohio code requires GFCI in wet areas and AFCI in bedrooms and other living spaces.

Yes. Ohio follows the National Electrical Code, which requires GFCI protection for all outlets within 6 feet of a sink, in bathrooms, garages, unfinished basements, crawl spaces, and outdoor locations. We assess your home and identify any gaps during the consultation.

In most cases, yes. GFCI outlets can replace standard outlets without rewiring the circuit. AFCI protection can be added at the breaker panel using AFCI circuit breakers, which protect the entire circuit without requiring changes at each outlet.